欧美黄色小说,奇米99,看毛片网

Radel? R-7300

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Radel PPSU
Product No: Radel R-7300
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Detergent Resistant，Flame Retardant，Good Processing Stability，Good Toughness，High Flow，Low，Smoke Emission，Low Toxicity

Product information

Radel? R-7300

Polyphenylsulfone

Solvay Specialty Polymers

Product Description:

Radel? R-7300 (for light colors) and R-7400 (for darker colors) polyphenylsulfone resins were developed specifically for aircraft interior applications, and through the use of a proprietary flame retardant package, offer low heat release, low smoke generation, and low toxic gas emissions. These resins comply with the FAA regulation 14CFR Part 25.853 Appendix F. In addition, they have excellent impact resistance and ESCR when exposed to fluids typically used by the aerospace industry, reducing the need for annealing or protective films.

Radel? R-7300 and R-7400 resins have excellent flow characteristics, readily filling complex parts with thin walls or long flow lengths.

Chemical Resistance:
One of the outstanding characteristics of Radel? R-7300 and R-7400 resins is their resistance to many commonly used aviation fluids. Three test methods: unstressed immersion, stressed with a 5-inch radius curve, and stressed with a variable radius curve fixture, were employed to evaluate resistance of Radel? resins to Skydrol? LD-4; 1,1,1-trichloroethane; Jet fuel A; methyl ethyl ketone; toluene; isopropanol; and Skydrol? 500B.

Available in various custom colors

Features	Chemical Resistant,Detergent Resistant,Flame Retardant,Good Processing Stability,Good Toughness,High Flow,Low Smoke Emission,Low Toxicity
Uses	Aerospace ApplicationsAircraft ApplicationsAircraft Interiors
Agency Ratings	FAA FAR 25.853aFAA FAR 25.853dOSU 55/55
RoHS Compliance	RoHS Compliant
Appearance	Colors Available
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.36		ASTM D792
Melt Mass-Flow Rate (MFR) (380°C/2.16 kg)	16	g/10 min	ASTM D1238
Water Absorption (24 hr)	0.30	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	405000	psi	ASTM D638
Tensile Strength	11000	psi	ASTM D638
Tensile Elongation (Break)	40	%	ASTM D638
Flexural Modulus	400000	psi	ASTM D790
Flexural Strength	16000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	1.5	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	360	°F	ASTM D648

Flammability	Nominal Value	Unit	Test Method
OSU Peak Heat Release Rate 2	< 55.0	kW/m2	FAR 25.853(d)
OSU Total Heat Release - 2 min 2	< 20.0	kW·min/m2	FAR 25.853(d)
Smoke Density			ASTM F814
Dm @ 4 min 3	< 5.0	Ds
Ds @ 1.5 min	1.0	Ds

Additional Information
Materials intended for aircraft interior parts must meet stringent flammability requirements. Radel R-7300 and R-7400 resins meet or exceed all commercial and regulatory requirements for flammability, smoke density, heat release, and toxic gas emissions.

Injection	Nominal Value	Unit
Drying Temperature	300	°F
Drying Time	4.0	hr
Rear Temperature	670 to 700	°F
Middle Temperature	680 to 710	°F
Front Temperature	690 to 720	°F
Nozzle Temperature	680 to 710	°F
Processing (Melt) Temp	690 to 730	°F
Mold Temperature	225 to 325	°F
Injection Rate	Fast
Screw Compression Ratio	2.0:1.0 to 3.0:1.0

Products

Products

Radel? R-7300

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service