一区二区三区www,成人交配视频,h片在线免费

TRIREX? 3025FD

Manufacturer: INEOS
Produced At: Korea / China
Product Category: PC
Product No: TRIREX 3025FD
Product Quantity: 25KG / BAG
Product Features: Food Contact Acceptable，Good Dimensional Stability，Good Electrical Properties，Good Flow，High Impact Resistance，Low，Moisture Absorption，Low Temperature Impact Resistance，Medium Viscosity，Weather Resistant

Product information

TRIREX? 3025FD

Polycarbonate

Samyang Corporation

Product Description:

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.

Agency Ratings : USP Class VI

TRIREX 3025FD is a polycarbonate resin grade which has high impact strength in combination with superior mechanical and physical property.

APPLICATIONS

TRIREX 3025FD resin grade is used for Medical devices, food contact materials and etc.

Medium viscosity. Transparent colors only.

Features	Food Contact Acceptable，Good Dimensional Stability，Good Electrical Properties，Good FlowHigh Impact Resistance，Low Moisture Absorption，Low Temperature Impact Resistance，Medium Viscosity，Weather Resistant
Uses	Appliances，Automotive Applications，Electrical/Electronic Applications，Medical Devices，Non-specific Food Applications，Optical Applications
Agency Ratings	USP Class VI
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.20		ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	10	g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.118 in)	5.0E-3 to 7.0E-3	in/in	ASTM D955
Water Absorption (24 hr, 73°F)	0.15	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	10100	psi	ASTM D638
Tensile Elongation (Break)	120	%	ASTM D638
Flexural Modulus	299000	psi	ASTM D790
Flexural Strength (Yield)	12500	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)	17	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	275	°F	ASTM D648
CLTE - Flow	2.8E-5 to 3.9E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	4.0E+16	ohms·cm	ASTM D257
Dielectric Strength	760	V/mil	ASTM D149
Arc Resistance	120	sec	ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.06 in)	V-2		UL 94

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time	3.0 to 5.0	hr
Suggested Max Moisture	0.020	%
Rear Temperature	473 to 518	°F
Middle Temperature	500 to 545	°F
Front Temperature	527 to 572	°F
Nozzle Temperature	527 to 590	°F
Processing (Melt) Temp	527 to 590	°F
Mold Temperature	149 to 221	°F
Back Pressure	36.3 to 102	psi
Screw Speed	40 to 70	rpm
Vent Depth	7.9E-4 to 3.1E-3	in

Products

Products

TRIREX? 3025FD

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service