大奶毛片,18禁一区二区三区,五月婷久久

Terluran? HI-10

Manufacturer: INEOS
Produced At: Korea / China
Product Category: ABS
Product No: Terluran HI-10
Product Quantity: 25KG / BAG
Product Features: Good Toughness，High Rigidity，High Strength，Low Temperature Impact Resistance，Medium Flow，Ultra High Impact Resistance

Product information

Terluran? HI-10

Acrylonitrile Butadiene Styrene

INEOS Styrolution Group GmbH

Product Description:

Terluran? HI-10 is an medium flow, injection molding grade with very high resistance to impact with excellent heat distortion and suitable for injection molding and extrusion.

FEATURES

High toughness

Very high impact

Medium flow

Great mechanical strength and rigidity

High impact at sub-zero temperatures

APPLICATIONS

Injection molding

Compounding

Appliance housings

Lawn & garden components requiring superior toughness

Features	Good Toughness，High Rigidity，High Strength，Low Temperature Impact Resistance，Medium Flow，Ultra High Impact Resistance
Uses	AppliancesCompoundingHousingsLawn and Garden Equipment
Forms	Pellets
Processing Method	CompoundingExtrusionInjection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.03		ASTM D792
--	1.03	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)			ASTM D1238
200°C/5.0 kg	0.10	g/10 min
220°C/10.0 kg	8.0	g/10 min
Melt Volume-Flow Rate (MVR)
230°C/3.8 kg	0.104	in3/10min	ASTM D1238
220°C/10.0 kg	0.336	in3/10min	ISO 1133
Molding Shrinkage
Flow	4.0E-3 to 7.0E-3	in/in	ASTM D955
--	0.40 to 0.70	%	ISO 294-4
Water Absorption
Saturation, 73°F	1.0	%	ASTM D570, ISO 62
Equilibrium, 73°F, 50% RH	0.21	%	ISO 62
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	95		ASTM D785
Ball Indentation Hardness	10700	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--	290000	psi	ASTM D638
--	276000	psi	ISO 527-2
Tensile Strength
Yield, 73°F	6240	psi	ASTM D638
Yield, 73°F	5510	psi	ISO 527-2
Tensile Strain
Yield, 73°F	2.8	%	ISO 527-2
Break	3.5	%	ASTM D638
Nominal Tensile Strain at Break (73°F)	9.0	%	ISO 527-2
Flexural Modulus	297000	psi	ASTM D790
Flexural Strength
--	9570	psi	ASTM D790
--	8120	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F	6.2	ft·lb/in2
73°F	17	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179
-22°F	67	ft·lb/in2
73°F	No Break
Notched Izod Impact
-22°F	2.2	ft·lb/in	ASTM D256
0°F	3.4	ft·lb/in	ASTM D256
73°F	8.4	ft·lb/in	ASTM D256
-22°F	6.7	ft·lb/in2	ISO 180/A
73°F	17	ft·lb/in2	ISO 180/A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed	201	°F	ASTM D648
66 psi, Annealed	215	°F	ASTM D648
66 psi, Annealed 3	207	°F	ISO 75-2/B
264 psi, Unannealed	186	°F	ASTM D648
264 psi, Annealed	208	°F	ASTM D648
264 psi, Annealed 3	199	°F	ISO 75-2/A
Vicat Softening Temperature
--	217	°F	ISO 306/A50
--	194	°F	ISO 306/B50
CLTE - Flow	4.4E-5 to 6.1E-5	in/in/°F	ISO 11359-2
Thermal Conductivity	1.2	Btu·in/hr/ft2/°F	DIN 52612

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity
--	> 1.0E+15	ohms·cm	ASTM D257
--	1.0E+15	ohms·cm	IEC 60093
Dielectric Constant
0.0394 in, 1 MHz	2.80		ASTM D150
100 Hz	2.90		IEC 60250
1 MHz	2.80		IEC 60250
Dissipation Factor			IEC 60250
100 Hz	5.4E-3
1 MHz	8.2E-3

Optical	Nominal Value	Unit	Test Method
Yellowness Index	15	YI	DIN 6167

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	2.0 to 4.0	hr
Processing (Melt) Temp	446 to 500	°F
Mold Temperature	86 to 176	°F
Injection Velocity	472	in/min

Products

Products

Terluran? HI-10

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service