亚洲深夜,夜夜夜夜操,中文字幕国产在线

<style id="jszjg"></style>

Stanyl? SC50

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl SC50
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Heat Stabilized，Low (to None) Phosphorus Content

Product information

Stanyl? SC50

Polyamide 46

Product Description:

30% Glass Reinforced, Flame Retardant, Halogen free and free of red phosphorous

Special Features:

Contains release agent

Heat stabilized or stable to heat

Phosphorous free

Used In:

Motor Starter/Overload Relays

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	Flame Retardant、Heat Stabilizer、Mold Release
Features	Flame Retardant、Heat Stabilized、Low (to None) Phosphorus Content
Uses	Electrical/Electronic Applications
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46-GF30 FR

Physical	Dry	Conditioned	Unit	Test Method
Density	1.53	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.0	--	%
Flow	0.40	--	%
Water Absorption (Equilibrium, 73°F, 50% RH)	2.1	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.81E+6	1.16E+6	psi	ISO 527-2
Tensile Stress (Break)	20300	14500	psi	ISO 527-2
Tensile Strain (Break)	1.7	2.5	%	ISO 527-2
Flexural Modulus	1.81E+6	1.16E+6	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength(73°F)	3.3	3.3	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength(73°F)	17	19	ft·lb/in2	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	527	--	°F	ISO 75-2/A
Glass Transition Temperature 3	167	--	°F	ISO 11357-2
Melting Temperature 3	563	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.9E-5	--	in/in/°F
Transverse	2.5E-5	--	in/in/°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	> 1.0E+15	1.0E+10	ohms·cm	IEC 60093
Electric Strength	760	510	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	4.30	13.2
1 MHz	4.00	4.70
Dissipation Factor				IEC 60250
100 Hz	5.5E-3	0.65
1 MHz	0.010	0.075
Comparative Tracking Index	425	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.030 in)	V-0	--		IEC 60695-11-10, -20

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	545 to 563	°F
Middle Temperature	554 to 572	°F
Front Temperature	563 to 572	°F
Nozzle Temperature	563 to 572	°F
Processing (Melt) Temp	563 to 572	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	72.5 to 435	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? SC50

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service