日本在线一区,在线免费观看成人,香蕉影院在线观看

Stanyl? TS250FK33

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TS250FK33
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Low Warpage，Platable，Lubricated

Product information

Stanyl? TS250FK33

Polyamide 46

Product Description:

30% Glass/Mineral Reinforced, Flame Retardant, Low Warpage

Special Features:

Contains release agent

Low warpage

Lubricated

Platable

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Glass\Mineral, 30% Filler by Weight
Additive	Flame RetardantLubricantMold Release
Features	Flame RetardantLow WarpageLubricatedPlatable
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46-(GF+MF)30 FR

Physical	Nominal Value	Unit	Test Method
Density	1.66	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.7	%
Flow	0.80	%
Water Absorption			ISO 62
Saturation, 73°F	5.8	%
Equilibrium, 73°F, 50% RH	1.6	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.16E+6	psi	ISO 527-2
Tensile Stress (Break)	17400	psi	ISO 527-2
Tensile Strain (Break)	2.0	%	ISO 527-2
Flexural Modulus	1.10E+6	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	1.9	ft·lb/in2	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	536	°F	ISO 75-2/A
Glass Transition Temperature 3	167	°F	ISO 11357-2
Melting Temperature 3	563	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.1E-5	in/in/°F
Transverse	3.1E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	760	V/mil	IEC 60243-1
Relative Permittivity (1 MHz)	4.00		IEC 60250
Dissipation Factor (1 MHz)	0.016		IEC 60250
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.030 in)	V-0		IEC 60695-11-10, -20

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	581 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TS250FK33

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service