涩涩视频在线播放,亚洲欧美一级,久久精品www人人爽人人

Stanyl? TS350

Manufacturer: Envalior/DSM

Produced At: Europe / China

Product Category: Polyamide 46（PA46）

Product No: Stanyl TS350

Product Quantity: 25KG / BAG

Product Features: Flame Retardant，Heat Stabilized，Lubricated，Platable

Product information

Stanyl? TS350

Polyamide 46

Product Description:

Unreinforced, Flame Retardant

Special Features:

Contains release agent

Heat stabilized or stable to heat

Lubricated

Platable

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Additive	Flame Retardant、Heat Stabilizer、Lubricant、Mold Release
Features	Flame Retardant、Heat Stabilized、Lubricated、Platable
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46 FR(17)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.43	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.5	--	%
Flow	1.5	--	%
Water Absorption				ISO 62
Saturation, 73°F	8.6	--	%
Equilibrium, 73°F, 50% RH	2.4	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	493000	--	psi	ISO 527-2
Tensile Stress (Yield)	11600	--	psi	ISO 527-2
Tensile Strain (Yield)	5.0	--	%	ISO 527-2
Nominal Tensile Strain at Break	7.0	--	%	ISO 527-2
Flexural Modulus	464000	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	1.4	--	ft·lb/in2
73°F	1.9	--	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	374	--	°F	ISO 75-2/A
Glass Transition Temperature 3	167	--	°F	ISO 11357-2
Melting Temperature 3	563	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	4.4E-5	--	in/in/°F
Transverse	5.0E-5	--	in/in/°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+9	ohms·cm	IEC 60093
Electric Strength	760	640	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.80	10.0
1 MHz	3.50	4.10
Dissipation Factor				IEC 60250
100 Hz	5.0E-3	0.28
1 MHz	0.020	0.080
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.030 in	V-0	--
0.06 in	V-0	--
Oxygen Index	29	--	%	ISO 4589-2

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.14	--	g/cm3
Melt Thermal Conductivity	1.7	--	Btu·in/hr/ft2/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	590 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TS350

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service