麻豆一区二区三区,女同性恋毛片,国产在线网站

^{<style id="wrqco"></style>}
<object id="wrqco"></object>

Stanyl? TW200F8

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW200F8
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Platable

Product information

Stanyl? TW200F8

Polyamide 46

Product Description:

40% Glass Reinforced, Heat Stabilized

Special Features:

Heat stabilized or stable to heat

Platable

Used In:

Rod Guides

Hot Charged Air Ducts

Charge Air Cooler Caps

Endlaminates (electro motors)

Brushholders (electro motors)

Coil insulation

Automotive e-motor Bobbins

EGR sensor

Start/Stop: Alternator and Starter parts

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Glass Fiber, 40% Filler by Weight
Additive	Heat Stabilizer
Features	Heat Stabilized、Platable
Uses	Automotive Applications、Bobbins、Electrical/Electronic Applications、Insulation、Laminates
Processing Method	Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1)
Resin ID (ISO 1043)	PA46-GF40

Physical	Dry	Conditioned	Unit	Test Method
Density	1.51	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.1	--	%
Flow	0.50	--	%
Water Absorption				ISO 62
Saturation, 73°F	8.1	--	%
Equilibrium, 73°F, 50% RH	2.2	--	%
Viscosity Number	145	--	cm3/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
--	1.89E+6	1.16E+6	psi
248°F	1.00E+6	--	psi
320°F	885000	--	psi
356°F	827000	--	psi
392°F	769000	--	psi
Tensile Stress				ISO 527-2
Break	33400	20300	psi
Break, 248°F	18900	--	psi
Break, 320°F	16700	--	psi
Break, 356°F	15200	--	psi
Break, 392°F	14500	--	psi
Tensile Strain				ISO 527-2
Break	3.0	6.0	%
Break, 248°F	6.5	--	%
Break, 320°F	6.5	--	%
Break, 356°F	6.5	--	%
Break, 392°F	6.5	--	%
Flexural Modulus				ISO 178
--	1.67E+6	1.02E+6	psi
248°F	841000	--	psi
320°F	754000	--	psi
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	5.7	5.7	ft·lb/in2
73°F	6.7	10	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	36	40	ft·lb/in2
73°F	45	48	ft·lb/in2
Notched Izod Impact Strength				ISO 180/1A
-40°F	5.7	5.7	ft·lb/in2
73°F	6.7	10	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	554	--	°F	ISO 75-2/B
264 psi, Unannealed	554	--	°F	ISO 75-2/A
Glass Transition Temperature 3	167	--	°F	ISO 11357-2
Vicat Softening Temperature	554	--	°F	ISO 306/B50
Melting Temperature 3	563	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.4E-5	--	in/in/°F
Transverse	2.8E-5	--	in/in/°F
RTI Elec (0.06 in)	149	--	°F	UL 746
Effective Thermal Diffusivity	1.36E-7	--	m2/s
Thermal Index - 5000 hr	351	--	°F	IEC 60216

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	581 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TW200F8

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service