Radilon? D 40P50K 333 NER 5624
Polyamide 610
PA610 flexible, high viscosity extrusion grade. Plasticized. Heat stabilized. Black colour.
Suitable for extrusion of tubes and profiles. Typical application: air pressure pipes.
This grade is partially renewably-sourced (60% of base polymer by weight).
Additive | - Heat Stabilizer，Plasticizer
|
Features | - Heat Stabilized，High Viscosity，Plasticized，Renewable Resource Content
|
Uses | |
RoHS Compliance | |
Appearance | |
Processing Method | - Extrusion，Profile Extrusion
|
Resin ID (ISO 1043) | |
Density | 1.10 | -- | g/cm3 | ISO 1183 |
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 2.5 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.1 | -- | % |
|
Tensile Modulus | 131000 | 79800 | psi | ISO 527-2/1A/1 |
Tensile Stress |
|
|
|
|
Yield | 5660 | 4350 | psi | ISO 527-2/1A/50 |
Break | 7110 | -- | psi | ISO 527-2/1A/5 |
Tensile Strain (Yield) | 40 | -- | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 300 | > 100 | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 103000 | -- | psi | ISO 178 |
Flexural Stress 2 | 4210 | -- | psi | ISO 178 |
Charpy Notched Impact Strength |
|
|
| ISO 179/1eA |
-22°F | 2.4 | -- | ft·lb/in2 |
|
73°F | 7.1 | 12 | ft·lb/in2 |
|
Heat Deflection Temperature (264 psi, Unannealed) | 122 | -- | °F | ISO 75-2/Af |
Melting Temperature 3 | 419 | -- | °F | ISO 11357-3 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | -4 | °F |
|
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 446 to 500 | °F |
|
Mold Temperature | 158 to 176 | °F |
|
Injection Rate | Moderate |
|
|
Melt Temperature | 446 to 482 | °F |
|
