麻豆视频观看,国产91免费在线观看,深夜成人福利视频

CYCOLOY? FR Resin C2950

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate + ABS
Product No: CYCOLOY FR Resin C2950
Product Quantity: 25KG / BAG
Product Features: Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance，Medium Heat Resistance

Product information

CYCOLOY? FR Resin C2950

Polycarbonate + ABS

SABIC Innovative Plastics

Product Description:

CYCOLOY C2950 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard high heat grade that can be injection molded. This non-chlorinated, non-brominated flame retardant high heat PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2950 resin is an excellent candidate for a wide variety of applications including appliances, lighting and electrical.

Additive	Flame Retardant
Features	Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance，Medium Heat Resistance
Uses	Appliances，Automotive Applications，Automotive Exterior Parts，Construction Applications，Electrical/Electronic Applications，Electronic Displays，Fluid Handling，Lawn and Garden Equipment，Lighting Applications，Medical/Healthcare Applications，Non-specific Food Applications，Outdoor Applications
Processing Method	Injection Molding
Multi-Point Data	Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Elastic Modulus vs Temperature (ASTM D4065) Flexural DMA (ASTM D4065) Instrumented Impact (Energy) (ASTM D3763) Instrumented Impact (Load) (ASTM D3763) Pressure-Volume-Temperature (PVT - Zoller Method) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Creep (ASTM D2990) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)
Also Available In	Asia Pacific

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity			ASTM D792
--	1.18
-- 3	1.22
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	10	g/10 min	ASTM D1238
Molding Shrinkage			Internal Method
Flow : 0.126 in	4.0E-3 to 6.0E-3	in/in
Across Flow : 0.126 in	4.0E-3 to 6.0E-3	in/in
Water Absorption			ASTM D570
24 hr	0.10	%
Equilibrium, 73°F	0.40	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	123		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength 4 (Yield)	8990	psi	ASTM D638
Tensile Elongation 4 (Break)	40	%	ASTM D638
Flexural Modulus 5 (3.94 in Span)	384000	psi	ASTM D790
Flexural Strength 5 (Yield, 3.94 in Span)	14800	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-22°F	3.0	ft·lb/in
73°F	10	ft·lb/in
Instrumented Dart Impact			ASTM D3763
-22°F, Total Energy	478	in·lb
73°F, Total Energy	540	in·lb

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.252 in	219	°F
264 psi, Unannealed, 0.126 in	194	°F
264 psi, Unannealed, 0.252 in	203	°F
Vicat Softening Temperature	234	°F	ASTM D1525 6
CLTE			ASTM D696
Flow : -22 to 86°F	4.0E-5	in/in/°F
Transverse : -22 to 86°F	4.0E-5	in/in/°F
Thermal Conductivity	1.4	Btu·in/hr/ft2/°F	ASTM C177
RTI Elec	185	°F	UL 746
RTI Imp	185	°F	UL 746
RTI Str	185	°F	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+16	ohms	ASTM D257
Volume Resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric Strength (0.126 in, in Oil)	490	V/mil	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.00
100 Hz	3.00
50 kHz	3.00
Dissipation Factor			ASTM D150
50 Hz	5.0E-3
60 Hz	5.0E-3
100 Hz	4.9E-3
Arc Resistance 7	PLC 6		ASTM D495
Comparative Tracking Index (CTI)	PLC 1		UL 746
High Amp Arc Ignition (HAI) 8	PLC 0		UL 746
High Voltage Arc Tracking Rate (HVTR)	PLC 2		UL 746
Hot-wire Ignition (HWI)	PLC 1		UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.06 in	V-0
0.10 in	5VB
Oxygen Index	32	%	ASTM D2863

Injection	Nominal Value	Unit
Drying Temperature	176 to 194	°F
Drying Time	3.0 to 4.0	hr
Suggested Max Moisture	0.040	%
Suggested Shot Size	30 to 80	%
Rear Temperature	428 to 491	°F
Middle Temperature	428 to 527	°F
Front Temperature	473 to 527	°F
Nozzle Temperature	473 to 527	°F
Processing (Melt) Temp	473 to 527	°F
Mold Temperature	140 to 176	°F
Back Pressure	43.5 to 102	psi
Screw Speed	40 to 70	rpm
Vent Depth	1.5E-3 to 3.0E-3	in

Products

Products

CYCOLOY? FR Resin C2950

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service