日本一二区视频,国产无套丰满白嫩对白,精品人妻无码一区二区

Crastin? FGS600F40 NC010

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PBT
Product No: Crastin? FGS600F40 NC010
Product Quantity: 25KG / BAG
Product Features: Food Contact Acceptable，Low Viscosity

Product information

Crastin? FGS600F40 NC010

THERMOPLASTIC POLYESTER RESIN

Product Description:

Unreinforced Low Viscosity Polybutylene Terephthalate Developed for Food Contact Applications

Features	Food Contact Acceptable,Low Viscosity
Uses	Non-specific Food Applications
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)	PBT
Resin ID (ISO 1043)	PBT

Physical	Nominal Value	Unit	Test Method
Density	1.31	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	2.01	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.6	%
Flow	1.6	%
Water Absorption			ISO 62
Saturation, 73°F, 0.0787 in	0.40	%
Equilibrium, 73°F, 0.0787 in, 50% RH	0.20	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	348000	psi	ISO 527-2
Tensile Stress (Yield)	7980	psi	ISO 527-2
Tensile Strain (Yield)	4.0	%	ISO 527-2
Nominal Tensile Strain at Break	30	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	377000	psi
1000 hr	261000	psi
Poisson's Ratio	0.38		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	1.9	ft·lb/in2
73°F	1.9	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	No Break
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	239	°F	ISO 75-2/B
66 psi, Annealed	356	°F	ISO 75-2/B
264 psi, Unannealed	122	°F	ISO 75-2/A
264 psi, Annealed	140	°F	ISO 75-2/A
Glass Transition Temperature 3	131	°F	ISO 11357-2
Vicat Softening Temperature	347	°F	ISO 306/B50
Melting Temperature 3	433	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.1E-5	in/in/°F
Transverse	6.7E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+12	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	660	V/mil	IEC 60243-1
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	0.020
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Burning Rate 4 (0.0394 in)	1.1	in/min	ISO 3795
Flame Rating			UL 94, IEC 60695-11-10, -20
0.06 in	HB
0.12 in	HB
Oxygen Index	22	%	ISO 4589-2
FMVSS Flammability	B		FMVSS 302
Fogging			ISO 6452
F-value (refraction)	95	%
G-value (condensate)	2.0E-4	g

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.11	g/cm3
Ejection Temperature	338	°F
Specific Heat Capacity of Melt	0.504	Btu/lb/°F
Thermal Conductivity of Melt	1.5	Btu·in/hr/ft2/°F
Additional Information	Nominal Value	Unit	Test Method
Odor	3.00		VDA 270

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.040	%
Processing (Melt) Temp	464 to 500	°F
Melt Temperature, Optimum	482	°F
Mold Temperature	86 to 266	°F
Mold Temperature, Optimum	176	°F
Holding Pressure	8700	psi
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm

Products

Products

Crastin? FGS600F40 NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service