手机在线精品视频,玩弄人妻少妇500系列,91视频一区二区

Crastin? S600F10 BK851

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PBT
Product No: Crastin? S600F10 BK851
Product Quantity: 25KG / BAG
Product Features: High Viscosity

Product information

Crastin? S600F10 BK851

THERMOPLASTIC POLYESTER RESIN

Product Description:

Unreinforced High Viscosity Polybutylene Terephthalate Developed for Extrusion and Injection Molding

Features	High Viscosity
RoHS Compliance	Contact Manufacturer
Processing Method	Coating,Extrusion,Injection Molding,Profile Extrusion
Part Marking Code (ISO 11469)	PBT
Resin ID (ISO 1043)	PBT

Physical	Nominal Value	Unit	Test Method
Density	1.30	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (250°C/2.16 kg)	10	g/10 min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.9	%
Flow	1.9	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	377000	psi	ISO 527-2
Tensile Stress (Yield)	8270	psi	ISO 527-2
Tensile Strain (Yield)	4.0	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	%	ISO 527-2
Flexural Stress	12300	psi	ISO 178
Poisson's Ratio	0.38		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	2.4	ft·lb/in2	ISO 179/1eA
Notched Izod Impact Strength (73°F)	1.9	ft·lb/in2	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Melting Temperature 3	437	°F	ISO 11357-3

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+14	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	990	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.40
1 MHz	3.30
Dissipation Factor			IEC 60250
100 Hz	5.0E-4
1 MHz	0.019
Comparative Tracking Index	400	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94, IEC 60695-11-10, -20
0.06 in	HB
0.12 in	HB
Oxygen Index	21	%	ISO 4589-2
FMVSS Flammability	SE		FMVSS 302

Fill Analysis	Nominal Value	Unit	Test Method
Ejection Temperature	338	°F
Additional Information	Nominal Value	Unit	Test Method
Emission of Organic Compounds	145	μgC/g	VDA 277
Odor	3.00		VDA 270

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.040	%
Processing (Melt) Temp	464 to 500	°F
Melt Temperature, Optimum	482	°F
Mold Temperature	86 to 266	°F
Mold Temperature, Optimum	176	°F
Holding Pressure	8700	psi
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm
Extrusion	Nominal Value	Unit
Drying Temperature	230 to 266	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.040	%
Melt Temperature	464 to 500	°F
Extrusion Melt Temperature, Optimum	482	°F

Products

Products

Crastin? S600F10 BK851

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service