亚洲经典一区二区三区,日本少妇xxxx动漫,中文字幕在线观看第一页

Hytrel? HTR8341G BK320

Manufacturer: Celanese
Produced At: Import/ China
Product Category: TPEE
Product No: Hytrel? HTR8341G BK320
Product Quantity: 25KG / BAG
Product Features: Fatigue Resistant,Heat Stabilized,High Viscosity,Lubricated

Product information

Hytrel? HTR8341G BK320

THERMOPLASTIC POLYESTER ELASTOMER

Product Description:

40 Shore D, Slightly Lubricated, High Viscosity Polyester Elastomer with Superior Fatigue Resistance Developed for Blow Molding

Additive	Heat Stabilizer
Features	Fatigue Resistant,Heat Stabilized,High Viscosity,Lubricated
Uses	Blow Molding Applications
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Blow Molding,Casting,Coating,Extrusion,Injection Molding,Profile Extrusion,Sheet Extrusion,Thermoforming
Multi-Point Data	Tensile Modulus vs. Temperature, Dynamic (ISO 11403-1)
Part Marking Code (ISO 11469)	TPC-ET
Resin ID (ISO 1043)	TPC-ET

Physical	Nominal Value	Unit	Test Method
Density	1.14	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.90	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)	0.0610	in3/10min	ISO 1133
Water Absorption			ISO 62
Saturation, 73°F, 0.0787 in	0.50	%
Equilibrium, 73°F, 0.0787 in, 50% RH	0.20	%
Hardness	Nominal Value	Unit	Test Method
Shore Hardness			ISO 7619
Shore D	40
Shore D, 15 sec	37

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	11600	psi	ISO 527-2
Tensile Stress			ISO 527-2
Break	4210	psi
10% Strain	972	psi
50% Strain	1730	psi
Tensile Strain (Break)	> 300	%	ISO 527-2
Nominal Tensile Strain at Break	390	%	ISO 527-2
Flexural Modulus	11600	psi	ISO 178
Elastomers	Nominal Value	Unit	Test Method
Tear Strength			ISO 34-1
Across Flow	690	lbf/in
Flow	630	lbf/in
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°F, Partial Break 2	No Break
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature 3	-49.0	°F	ISO 11357-2
Melting Temperature 3	406	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	9.9E-5	in/in/°F
Transverse	9.3E-5	in/in/°F

Flammability	Nominal Value	Unit	Test Method
Burning Rate 4 (0.0394 in)	< 3.9	in/min	ISO 3795
FMVSS Flammability	B		FMVSS 302

Injection	Nominal Value	Unit
Drying Temperature	212	°F
Drying Time - Desiccant Dryer	3.0 to 4.0	hr
Suggested Max Moisture	0.080	%
Processing (Melt) Temp	446 to 482	°F
Melt Temperature, Optimum	464	°F
Mold Temperature	104 to 122	°F
Mold Temperature, Optimum	113	°F
Drying Recommended	yes

Products

Products

Hytrel? HTR8341G BK320

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service