亚洲四虎av,超碰护士,中文字幕一区二区不卡

RTP 3881

Manufacturer: RTP Company
Produced At: Import / China
Product Category: Polyaryletherketone（PAEK）
Product No: RTP 3881
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Electrically Conductive，Good Moldability，Good Stiffness，Good Thermal Stability，High Strength

Product information

RTP 3881

Polyaryletherketone

RTP Company

Product Description:

Warning: The status of this material is 'Commercial: Limited Issue'

The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.

Filler / Reinforcement	Carbon Fiber, 10% Filler by Weight
Features	Chemical Resistant,Electrically Conductive,Good Moldability,Good Stiffness,Good Thermal Stability,High Strength
RoHS Compliance	Contact Manufacturer
Appearance	Black,Natural Color
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.33		ASTM D792
Molding Shrinkage - Flow	2.0E-3 to 3.0E-3	in/in	ASTM D955
Water Absorption (24 hr, 73°F)	0.20	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.70E+6	psi	ASTM D638
Tensile Strength (Yield)	25100	psi	ASTM D638
Tensile Elongation (Break)	2.4	%	ASTM D638
Flexural Modulus	1.50E+6	psi	ASTM D790
Flexural Strength (Yield)	38400	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.125 in)	1.0	ft·lb/in	ASTM D256
Unnotched Izod Impact (0.125 in)	10	ft·lb/in	ASTM D4812

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	600	°F	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	2.0E+3	ohms·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Injection	Nominal Value	Unit
Drying Temperature	300	°F
Drying Time	3.0	hr
Suggested Max Moisture	0.010	%
Suggested Max Regrind	20	%
Rear Temperature	675 to 750	°F
Middle Temperature	690 to 785	°F
Front Temperature	725 to 800	°F
Mold Temperature	300 to 425	°F
Injection Pressure	10000 to 18000	psi
Back Pressure	25.0 to 100	psi
Screw Speed	60 to 90	rpm
Clamp Tonnage	5.0 to 8.0	tons/in2	Filler / Reinforcement Carbon Fiber, 10% Filler by WeightFeatures Chemical ResistantElectrically ConductiveGood MoldabilityGood StiffnessGood Thermal StabilityHigh StrengthRoHS Compliance Contact ManufacturerAppearance BlackNatural Color Forms PelletsProcessing Method Injection Molding PhysicalNominal ValueUnitTest MethodDensity / Specific Gravity1.33 ASTM D792Molding Shrinkage - Flow2.0E-3 to 3.0E-3in/inASTM D955Water Absorption (24 hr, 73°F)0.20%ASTM D570 MechanicalNominal ValueUnitTest MethodTensile Modulus1.70E+6psiASTM D638Tensile Strength (Yield)25100psiASTM D638Tensile Elongation (Break)2.4%ASTM D638Flexural Modulus1.50E+6psiASTM D790Flexural Strength (Yield)38400psiASTM D790ImpactNominal ValueUnitTest MethodNotched Izod Impact (0.125 in)1.0ft·lb/inASTM D256Unnotched Izod Impact (0.125 in)10ft·lb/inASTM D4812 ThermalNominal ValueUnitTest MethodDeflection Temperature Under Load (264 psi, Unannealed)600°FASTM D648 ElectricalNominal ValueUnitTest MethodVolume Resistivity2.0E+3ohms·cmASTM D257FlammabilityNominal ValueUnitTest MethodFlame RatingV-0 UL 94 InjectionNominal ValueUnit Drying Temperature300°F Drying Time3.0hr Suggested Max Moisture0.010% Suggested Max Regrind20% Rear Temperature675 to 750°F Middle Temperature690 to 785°F Front Temperature725 to 800°F Mold Temperature300 to 425°F Injection Pressure10000 to 18000psi Back Pressure25.0 to 100psi Screw Speed60 to 90rpm Clamp Tonnage5.0 to 8.0tons/in2

Products

Products

RTP 3881

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service