精品99999,欧美少妇18p,婷婷日韩

Arnitel? EM460

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Thermoplastic Copolyester Elastomer
Product No: Arnitel EM460
Product Quantity: 25KG / BAG
Product Features: USP Class VI

Product information

Arnitel? EM460

Thermoplastic Copolyester Elastomer

Product Description:

Injection Molding or Extrusion Grade

Special Features:

USP class VI classified

Used In:

Conveyor Belts

Arnitel? is a high-performance ThermoPlastic Copolyester (TPC) that offers you a unique combination of flexibility, high temperature resistance and strength - plus excellent processing characteristics.
In industries ranging from automotive to E&E, Arnitel? is increasingly being as a lighter, smarter, greener alternative to conventional rubbers €" reducing environmental impact and ultimately, system costs.
The product is supported by an experienced and knowledgeable global team continuously working on new ideas and applications, as well as exploring new markets. By listening to your needs and understanding your process and products, we develop solutions that make a real difference.

Uses	Conveyor Parts
Agency Ratings	USP Class VI
Processing Method	Extrusion，Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	ISO 18064 TPC-ET

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)	2.81	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	1.3	%
Water Absorption			ISO 62
Saturation, 73°F	0.70	%
Equilibrium, 73°F, 50% RH	0.30	%
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, 3 sec)	40		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	12300	psi	ISO 527-2
Tensile Stress			ISO 527-2
Yield	1310	psi
Break	3340	psi
5.0% Strain	566	psi
10% Strain	957	psi
50% Strain	1330	psi
100% Strain	1350	psi
300% Strain	1710	psi
Tensile Strain			ISO 527-2
Yield	45	%
Break	> 300	%
Nominal Tensile Strain at Break	> 50 800	%	ISO 527-2
Elastomers	Nominal Value	Unit	Test Method
Tear Strength	570	lbf/in	ISO 34-1
Compression Set			ISO 815
73°F	26	%
158°F	50	%
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	No Break
73°F	No Break
Notched Izod Impact Strength			ISO 180/1A
-4°F	No Break
73°F	No Break
Tensile Impact Strength (73°F)	89.0	ft·lb/in2	ISO 8256/1

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	122	°F	ISO 306/B50
Melting Temperature 3	372	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	8.9E-5	in/in/°F
Transverse	8.9E-5	in/in/°F
Effective Thermal Diffusivity	5.99E-8	m2/s

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+13	ohms·cm	IEC 60093
Electric Strength	510	V/mil	IEC 60243-1
Relative Permittivity (1 MHz)	4.40		IEC 60250
Dissipation Factor (1 MHz)	0.035		IEC 60250
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.06 in)	HB		IEC 60695-11-10, -20

Fill Analysis	Nominal Value	Unit
Melt Density	0.928	g/cm3
Melt Thermal Conductivity	0.69	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.430	Btu/lb/°F

Injection	Nominal Value	Unit
Drying Temperature	212	°F
Drying Time	4.0 to 6.0	hr
Rear Temperature	374 to 410	°F
Middle Temperature	392 to 428	°F
Front Temperature	410 to 446	°F
Nozzle Temperature	428 to 464	°F
Processing (Melt) Temp	428 to 464	°F
Mold Temperature	68 to 122	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0
Extrusion	Nominal Value	Unit
Melt Temperature	383 to 464	°F

Products

Products

Arnitel? EM460

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service