亚洲jizzjizz日本少妇,国产精品五月天,亚洲五月激情

Arnitel? PL380

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Thermoplastic Copolyester Elastomer
Product No: Arnitel PL380
Product Quantity: 25KG / BAG
Product Features: Drinking Water Contact Acceptable

Product information

Arnitel? PL380

Thermoplastic Copolyester Elastomer

Product Description:

Injection Molding, Drinking Water Grade

Special Features:

Drinking Water Grade

Used In:

Bed Springs

Suit Case Handles

Railway Pads

Arnitel? is a high-performance ThermoPlastic Copolyester (TPC) that offers you a unique combination of flexibility, high temperature resistance and strength - plus excellent processing characteristics.
In industries ranging from automotive to E&E, Arnitel? is increasingly being as a lighter, smarter, greener alternative to conventional rubbers €" reducing environmental impact and ultimately, system costs.
The product is supported by an experienced and knowledgeable global team continuously working on new ideas and applications, as well as exploring new markets. By listening to your needs and understanding your process and products, we develop solutions that make a real difference.

Features	Drinking Water Contact Acceptable
Uses	Handles，Springs
Processing Method	Injection Molding
Resin ID (ISO 1043)	ISO 18064 TPC-ET

Physical	Nominal Value	Unit	Test Method
Density	1.16	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)	1.92	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.8	%
Flow	1.6	%
Water Absorption			ISO 62
Saturation, 73°F	7.0	%
Equilibrium, 73°F, 50% RH	0.40	%
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, 3 sec)	32		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	6380	psi	ISO 527-2
Tensile Stress			ISO 527-2
Break	2320	psi
5.0% Strain	319	psi
10% Strain	580	psi
50% Strain	1020	psi
100% Strain	1160	psi
300% Strain	1710	psi
Nominal Tensile Strain at Break	530	%	ISO 527-2
Elastomers	Nominal Value	Unit	Test Method
Tear Strength	430	lbf/in	ISO 34-1
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	No Break
73°F	No Break
Notched Izod Impact Strength			ISO 180/1A
-4°F	No Break
73°F	No Break
Tensile Impact Strength (73°F)	85.2	ft·lb/in2	ISO 8256/1

Thermal	Nominal Value	Unit	Test Method
Melting Temperature 3	414	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	8.3E-5	in/in/°F
Transverse	8.3E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+14	ohms·cm	IEC 60093
Electric Strength	510	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	4.70
1 MHz	4.40
Dissipation Factor			IEC 60250
100 Hz	0.031
1 MHz	0.081
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.06 in	HB
0.12 in	HB

Injection	Nominal Value	Unit
Drying Temperature	230	°F
Drying Time	4.0 to 6.0	hr
Rear Temperature	392 to 428	°F
Middle Temperature	410 to 446	°F
Front Temperature	428 to 464	°F
Nozzle Temperature	446 to 482	°F
Processing (Melt) Temp	446 to 482	°F
Mold Temperature	68 to 122	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnitel? PL380

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service