国产精品永久免费观看,99色图,欧美图片一区

Arnite? A04 900

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate（PET）
Product No: Arnite A04 900
Product Quantity: 25KG / BAG
Product Features: Medium Viscosity，Nucleated

Product information

Arnite? A04 900

Polyethylene Terephthalate

Product Description:

Medium Viscosity, Nucleated

Special Features:

Contains release agent

Medium viscosity

Nucleated

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Additive	Mold Release，Nucleating Agent
Features	Medium Viscosity，Nucleated
Processing Method	Injection Molding
Resin ID (ISO 1043)	PET

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.7	%
Flow	1.7	%
Water Absorption			ISO 62
Saturation, 73°F	0.50	%
Equilibrium, 73°F, 50% RH	0.20	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	406000	psi	ISO 527-2
Tensile Stress (Yield)	11600	psi	ISO 527-2
Tensile Strain (Yield)	4.0	%	ISO 527-2
Nominal Tensile Strain at Break	12	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	1.4	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)	No Break		ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	239	°F	ISO 75-2/B
264 psi, Unannealed	176	°F	ISO 75-2/A
Melting Temperature 3	491	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	3.9E-5	in/in/°F
Transverse	3.9E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	3.30
1 MHz	3.20
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	2.1E-3
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.030 in	HB
0.06 in	HB

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	518 to 536	°F
Middle Temperature	518 to 554	°F
Front Temperature	518 to 554	°F
Nozzle Temperature	518 to 554	°F
Processing (Melt) Temp	518 to 554	°F
Mold Temperature	266 to 284	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnite? A04 900

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service