a毛片基地,亚洲女人在线,婷婷色在线视频

Arnite? AV2 391 XT-P

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate（PET）
Product No: Arnite AV2 391 XT-P
Product Quantity: 25KG / BAG
Product Features: Platable

Product information

Arnite? AV2 391 XT-P

Polyethylene Terephthalate

Product Description:

50% Glass Reinforced, Good platebility, Applications with extremely narrow tolerances

Special Features:

Contains release agent

Platable

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Filler / Reinforcement	Glass Fiber, 50% Filler by Weight
Additive	Mold Release
Features	Platable
Processing Method	Injection Molding
Resin ID (ISO 1043)	PET-GF50

Physical	Nominal Value	Unit	Test Method
Density	1.78	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	0.80	%
Flow	0.20	%
Water Absorption			ISO 62
Saturation, 73°F	0.30	%
Equilibrium, 73°F, 50% RH	0.12	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2.61E+6	psi	ISO 527-2
Tensile Stress (Break)	28300	psi	ISO 527-2
Tensile Strain (Break)	2.0	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	4.3	ft·lb/in2
73°F	4.3	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	26	ft·lb/in2
73°F	26	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	486	°F	ISO 75-2/B
264 psi, Unannealed	464	°F	ISO 75-2/A
Melting Temperature 2	491	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.1E-5	in/in/°F
Transverse	1.9E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	3.80
1 MHz	3.50
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	0.011
Comparative Tracking Index	250	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.06 in	HB
0.12 in	HB

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	518 to 536	°F
Middle Temperature	518 to 554	°F
Front Temperature	518 to 554	°F
Nozzle Temperature	518 to 554	°F
Processing (Melt) Temp	518 to 554	°F
Mold Temperature	266 to 284	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnite? AV2 391 XT-P

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service