最好看的中文字幕,非洲一级黄色片,色就是欧美

Arnite? TV4 220

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polybutylene Terephthalate（PBT）
Product No: Arnite? TV4 220
Product Quantity: 25KG / BAG
Product Features: Additive Mold Release

Product information

Arnite? TV4 220

Polybutylene Terephthalate

Product Description:

10% Glass Reinforced

Special Features:

Contains release agent

Used In:

Bezels and AFL Frames

Fuse Holders

E-Boxes

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Filler / Reinforcement	Glass Fiber, 10% Filler by Weight
Additive	Mold Release
Processing Method	Injection Molding
Multi-Point Data	Specific Heat vs. Temperature (ISO 11403-2)
Resin ID (ISO 1043)	PBT-GF10

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	1.28	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	0.85	%
Water Absorption			ISO 62
Saturation, 73°F	0.35	%
Equilibrium, 73°F, 50% RH	0.16	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	667000	psi	ISO 527-2
Tensile Stress (Break)	13100	psi	ISO 527-2
Tensile Strain (Break)	4.0	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	2.4	ft·lb/in2
73°F	1.9	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	14	ft·lb/in2
73°F	16	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Melting Temperature 2	437	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	3.3E-5	in/in/°F
Transverse	4.4E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.06 in)	HB		IEC 60695-11-10, -20

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	446 to 464	°F
Middle Temperature	446 to 482	°F
Front Temperature	464 to 500	°F
Nozzle Temperature	464 to 500	°F
Processing (Melt) Temp	464 to 518	°F
Mold Temperature	140 to 212	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

<rt id="pamnz"></rt>

_{<center id="pamnz"></center>}

Products

Products

Arnite? TV4 220

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service