亚洲精品1区2区3区,国产福利在线观看,91超碰人人

Akulon? K224-HG7

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon K224-HG7
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized

Product information

Akulon? K224-HG7

Polyamide 6

Product Description:

35% Glass Reinforced, Heat Stabilized

Special Features:

Contains release agent

Heat stabilized or stable to heat

Used In:

Air inlet manifolds

Integrated Air Inlet Manifolds (up to 180°C)

Charge Air Cooler Caps

Oil Sumps and Pans

Transmission Oil Pans

Rocker Valve Covers

Fans & Shrouds

Fuel System: Various Components

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Filler / Reinforcement	Glass Fiber, 35% Filler by Weight
Additive	Heat Stabilizer/Mold Release
Features	Heat Stabilized
Uses	Protective Coverings
Processing Method	Injection Molding
Multi-Point Data	Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PA6-GF35

Physical	Dry	Conditioned	Unit	Test Method
Density	1.40	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.90	--	%
Flow	0.30	--	%
Water Absorption				ISO 62
Saturation, 73°F	5.9	--	%
Equilibrium, 73°F, 50% RH	1.8	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.67E+6	1.02E+6	psi	ISO 527-2
Tensile Stress (Break)	28300	18100	psi	ISO 527-2
Tensile Strain (Break)	3.5	7.0	%	ISO 527-2
Flexural Modulus	1.41E+6	--	psi	ISO 178
Flexural Stress	37000	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	5.7	5.7	ft·lb/in2
73°F	7.6	11	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	36	36	ft·lb/in2
73°F	43	48	ft·lb/in2
Notched Izod Impact Strength(73°F)	7.1	--	ft·lb/in2	ISO 180/1A

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	428	--	°F	ISO 75-2/B
264 psi, Unannealed	410	--	°F	ISO 75-2/A
Melting Temperature 3	428	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.1E-5	--	in/in/°F
Transverse	3.3E-5	--	in/in/°F
Effective Thermal Diffusivity	1.10E-7	--	m2/s
Thermal Index - 5000 hr	360	--	°F	IEC 60216

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+14	1.0E+12	ohms·cm	IEC 60093
Electric Strength	890	640	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.50	14.0
1 MHz	3.30	4.40
Dissipation Factor				IEC 60250
100 Hz	5.0E-3	0.30
1 MHz	0.015	0.11
Comparative Tracking Index	--	500	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.028 in	HB	--
0.06 in	HB	--

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.15	--	g/cm3
Melt Thermal Conductivity	1.9	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.504	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	491 to 509	°F
Middle Temperature	509 to 527	°F
Front Temperature	509 to 536	°F
Nozzle Temperature	500 to 536	°F
Processing (Melt) Temp	482 to 545	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Akulon? K224-HG7

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service