蜜桃成人在线视频,干骚视频,免费福利在线观看

Ultramid? A3EG10

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 66 Copolymer
Product No: Ultramid A3EG10
Product Quantity: 25KG / BAG
Product Features: High Stiffness、Oil Resistant

Product information

Ultramid? A3EG10

Polyamide 66

BASF Corporation

Product Description:

A Glass fibre reinforced injection moulding grade for industrial parts requiring high rigidity and providing electrical insulation.

Filler / Reinforcement	Glass Fiber, 50% Filler by Weight
Features	High Rigidity、Oil Resistant
Uses	Electronic Insulation、Industrial Parts
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.56	--	g/cm3	ISO 1183
Apparent (Bulk) Density	0.70	--	g/cm3
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	0.488	--	in3/10min	ISO 1133
Molding Shrinkage				ISO 294-4
Across Flow	0.82	--	%
Flow	0.33	--	%
Water Absorption				ISO 62
Saturation, 73°F	3.7 to 4.3	--	%
Equilibrium, 73°F, 50% RH	1.0 to 1.4	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	130	--	cm3/g	ISO 307
Mold Shrinkage - constrained 3	0.45	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	2.44E+6	1.81E+6	psi	ISO 527-2
Tensile Stress (Break)	34800	26100	psi	ISO 527-2
Tensile Strain (Break)	2.5	3.5	%	ISO 527-2
Tensile Creep Modulus 4 (1000 hr)	--	1.13E+6	psi	ISO 899-1
Flexural Modulus	2.18E+6	1.96E+6	psi	ISO 178
Flexural Stress	52200	43500	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	6.2	--	ft·lb/in2
73°F	8.6	12	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	43	--	ft·lb/in2
73°F	45	48	ft·lb/in2
Notched Izod Impact Strength(73°F)	6.2	6.9	ft·lb/in2	ISO 180/A

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	500	--	°F	ISO 75-2/B
264 psi, Unannealed	482	--	°F	ISO 75-2/A
Melting Temperature	500	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow : 73 to 176°F	2.8E-6 to 1.1E-5	--	in/in/°F
Transverse : 73 to 176°F	2.8E-5 to 3.3E-5	--	in/in/°F
Specific Heat	0.311	--	Btu/lb/°F
Thermal Conductivity	2.6	--	Btu·in/hr/ft2/°F	DIN 52612
Maximum Service Temperature - short cycle operation	464	--	°F
Temperature Index - at 50% loss of tensile strength				IEC 60216
-- 5	329	--	°F
-- 6	275	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.80	6.60		IEC 60250
Dissipation Factor (1 MHz)	0.015	0.17		IEC 60250
Comparative Tracking Index(Solution A)	550	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20
Halogen Content	< 100	--	mg/kg	Internal Method

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA66-GF50	--

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.15	%
Hopper Temperature	176	°F
Rear Temperature	572	°F
Middle Temperature	572	°F
Front Temperature	572	°F
Nozzle Temperature	572	°F
Processing (Melt) Temp	536 to 590	°F
Mold Temperature	176 to 194	°F

如需巴斯夫原廠物性表及相關文件，請聯系我們工作人員，謝謝！

Products

Products

Ultramid? A3EG10

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service