欧美福利视频,九九在线,日本在线网址

Ultramid? A3WG3

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 66 Copolymer
Product No: Ultramid A3WG3
Product Quantity: 25KG / BAG
Product Features: Good Stiffness、Heat Aging Resistant、Oil Resistant

Product information

Ultramid? A3WG3

Polyamide 66

BASF Corporation

Product Description:

Glass fibre reinforced and heat aging resistance injection moulding grade for machine components and housings of medium stiffness.

Filler / Reinforcement	Glass Fiber, 15% Filler by Weight
Features	Good Stiffness、Heat Aging Resistant、Oil Resistant
Uses	Housings
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.23	--	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	3.66	--	in3/10min	ISO 1133
Water Absorption				ISO 62
Saturation, 73°F	6.7 to 7.3	--	%
Equilibrium, 73°F, 50% RH	1.9 to 2.5	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	145	--	cm3/g	ISO 307
Mold Shrinkage - constrained 3	0.61	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	870000	653000	psi	ISO 527-2
Tensile Stress (Break)	18900	12300	psi	ISO 527-2
Tensile Strain (Break)	3.0	10	%	ISO 527-2
Tensile Creep Modulus 4 (1000 hr)	--	377000	psi	ISO 899-1
Flexural Modulus	798000	580000	psi	ISO 178
Flexural Stress	29000	18100	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	3.3	--	ft·lb/in2
73°F	3.8	5.2	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	20	--	ft·lb/in2
73°F	21	33	ft·lb/in2
Notched Izod Impact Strength(73°F)	2.6	3.1	ft·lb/in2	ISO 180/A

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	482	--	°F	ISO 75-2/B
264 psi, Unannealed	464	--	°F	ISO 75-2/A
Melting Temperature	500	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow : 73 to 176°F	1.7E-5 to 1.9E-5	1.7E-5 to 1.9E-5	in/in/°F
Transverse : 73 to 176°F	3.9E-5 to 4.4E-5	3.9E-5 to 4.4E-5	in/in/°F
Specific Heat	0.430	--	Btu/lb/°F
Thermal Conductivity	2.3	--	Btu·in/hr/ft2/°F	DIN 52612
Maximum Service Temperature - short cycle operation	464	--	°F
Temperature Index - at 50% loss of tensile strength				IEC 60216
-- 5	347	--	°F
-- 6	293	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.50	5.50		IEC 60250
Dissipation Factor (1 MHz)	0.014	0.30		IEC 60250
Comparative Tracking Index(Solution A)	450	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA66-GF15	--

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.15	%
Hopper Temperature	176	°F
Rear Temperature	554	°F
Middle Temperature	554	°F
Front Temperature	554	°F
Nozzle Temperature	554	°F
Processing (Melt) Temp	536 to 572	°F
Mold Temperature	176 to 194	°F
Screw Speed	< 709	in/min

Products

Products

Ultramid? A3WG3

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service