美妇湿透娇羞紧窄迎合,一级看片免费视频,亚州av在线

^{<label id="5udcv"></label>}

Ultrason? E 2010 G6

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyethersulfone
Product No: Ultrason E2010G6
Product Quantity: 25KG / BAG
Product Features: High Rigidity、High Strength、Medium Viscosity

Product information

Ultrason? E 2010 G6

Polyethersulfone

BASF Corporation

Product Description:

Ultrason E 2010 G6 is a 30% glass reinforced, medium viscosity injection molding PESU grade with high rigidity and strength.

Applications
Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Features	High Rigidity High Strength Medium Viscosity
Uses	Electrical Parts Printer Parts
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density	1.59	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)	1.53	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	0.58	%
Flow	0.28	%
Water Absorption			ISO 62
Saturation, 73°F	1.6	%
Equilibrium, 73°F, 50% RH	0.60	%
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	32500	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)	1.42E+6	psi	ISO 527-2
Tensile Stress (Break, 73°F)	21800	psi	ISO 527-2
Tensile Strain (Break, 73°F)	2.3	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F	3.8	ft·lb/in2
73°F	4.5	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179
-22°F	29	ft·lb/in2
73°F	26	ft·lb/in2
Notched Izod Impact Strength			ISO 180
-22°F	4.5	ft·lb/in2
73°F	4.8	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	433	°F	ISO 75-2/A
CLTE - Flow	8.3E-6	in/in/°F
RTI Elec			UL 746
0.06 in	356	°F
0.12 in	356	°F
RTI Imp			UL 746
0.06 in	356	°F
0.12 in	374	°F
RTI Str			UL 746
0.06 in	374	°F
0.12 in	374	°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	940	V/mil	IEC 60243-1
Dielectric Constant			IEC 60250
100 Hz	4.30
1 MHz	4.30
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	0.010
Comparative Tracking Index	125	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.06 in	V-0
0.12 in	V-0

Injection	Nominal Value	Unit
Drying Temperature	266 to 302	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	662 to 734	°F
Mold Temperature	302 to 374	°F
Injection Pressure	508 to 1810	psi
Injection Rate	Fast

Products

Products

Ultrason? E 2010 G6

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service