国产主播精品在线,亚洲无套,天天躁日日躁狠狠躁伊人

Elastollan? 880A-13N

Manufacturer: BASF
Produced At: Europe / China
Product Category: TPU
Product No: Elastollan 880A-13N
Product Quantity: 25KG / BAG
Product Features: Abrasion Resistant、Fuel Resistant、Good Tear Strength、Good Toughness、Oil Resistant

Product information

Elastollan? 880A-13N

Thermoplastic Polyurethane Elastomer (Polyester)

BASF Corp. Thermoplastic Polyurethanes

Product Description:

Elastollan? 880AN is specifically formulated for transparent film applications. It exhibits excellent abrasion resistance, toughness, transparency, and oil/fuel resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan?880AN is supplied uncolored in pellet form.

Uses	Film
Appearance	Colorless
Processing Method	Extrusion、Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.20		ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/3.8 kg	15 to 25	g/10 min
190°C/8.7 kg	40 to 60	g/10 min
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	78		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Injection Molded)	3600	psi	ASTM D412
Flexural Modulus (Injection Molded)	3200	psi	ASTM D790
Taber Abrasion Resistance	40.0	mg	ASTM D1044
Abrasion - DIN	10	mm3	DIN 53516
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% Strain	770	psi
300% Strain	1840	psi
Tensile Strength	4800	psi	ASTM D412
Tensile Elongation (Break)	610	%	ASTM D412
Tear Strength 2	490	lbf/in	ASTM D624
Compression Set			ASTM D395B
73°F, 22 hr	20	%
158°F, 22 hr	50	%

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	-16.6	°F	Internal Method
Vicat Softening Temperature	147	°F	ASTM D1525
Softening Point - DMA	151	°F	Internal Method

Injection	Nominal Value	Unit
Drying Temperature	212 to 230	°F
Drying Time	2.0 to 3.0	hr
Suggested Max Moisture	0.030	%
Rear Temperature	338 to 410	°F
Middle Temperature	338 to 410	°F
Front Temperature	338 to 410	°F
Nozzle Temperature	392 to 410	°F
Extrusion	Nominal Value	Unit
Drying Temperature	212 to 230	°F
Drying Time	2.0 to 3.0	hr
Cylinder Zone 1 Temp.	320 to 392	°F
Cylinder Zone 3 Temp.	320 to 392	°F
Cylinder Zone 5 Temp.	320 to 392	°F
Adapter Temperature	347 to 392	°F
Die Temperature	347 to 401	°F

Products

Products

Elastollan? 880A-13N

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service