不卡视频在线播放,水蜜桃影库,玖玖伊人

CYCOLAC? Resin FR23

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate
Product No: CYCOLAC Resin FR23
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Good Moldability，Good Toughness

Product information

CYCOLAC? Resin FR23

Acrylonitrile Butadiene Styrene

SABIC Innovative Plastics

Product Description:

Flame retardant ABS (non-PBBE additives). Good properties/toughness. Excellent moldability. UL94 V-0 rated.

Additive	Flame Retardant
Features	Flame Retardant,Good Moldability,Good Toughness
Processing Method	Injection Molding
Multi-Point Data	Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Flexural DMA (ASTM D4065) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.17		ASTM D792
Melt Mass-Flow Rate (MFR)
230°C/3.8 kg	6.8	g/10 min	ASTM D1238
220°C/5.0 kg	9.8	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)	2.26	in3/10min	ISO 1133
Molding Shrinkage - Flow (0.126 in)	5.0E-3 to 7.0E-3	in/in	Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus 3	350000	psi	ASTM D638
Tensile Strength 4			ASTM D638
Yield	6200	psi
Break	5100	psi
Tensile Elongation 4			ASTM D638
Yield	2.1	%
Break	11	%
Flexural Modulus 5 (1.97 in Span)	395000	psi	ASTM D790
Flexural Strength 5 (Yield, 1.97 in Span)	10600	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F)	5.0	ft·lb/in	ASTM D256
Instrumented Dart Impact (73°F, Total Energy)	370	in·lb	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.126 in	183	°F
264 psi, Unannealed, 0.126 in	162	°F
Vicat Softening Temperature	194	°F	ASTM D1525 6
CLTE			ASTM E831
Flow : -40 to 104°F	4.4E-5	in/in/°F
Transverse : -40 to 104°F	4.4E-5	in/in/°F
RTI Elec	140	°F	UL 746
RTI Imp	140	°F	UL 746
RTI Str	140	°F	UL 746

Flammability	Nominal Value	Test Method
Flame Rating		UL 94
0.09 in	V-0
0.10 in	5VB

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (392°F, 1000 sec^-1)	310	Pa·s	ASTM D3835

Injection	Nominal Value	Unit
Drying Temperature	180 to 190	°F
Drying Time	2.0 to 4.0	hr
Drying Time, Maximum	6.0	hr
Suggested Max Moisture	0.10	%
Suggested Shot Size	50 to 70	%
Rear Temperature	340 to 360	°F
Middle Temperature	380 to 400	°F
Front Temperature	390 to 420	°F
Nozzle Temperature	390 to 430	°F
Processing (Melt) Temp	390 to 430	°F
Mold Temperature	120 to 160	°F
Back Pressure	50.0 to 100	psi
Screw Speed	30 to 60	rpm
Vent Depth	1.5E-3 to 2.0E-3	in

Products

Products

CYCOLAC? Resin FR23

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service