黄色片在哪里看,久久夜靖品,www.国产黄色

Amodel? ET-1000 HS

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Amodel PPA
Product No: Amodel ET-1000 HS
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant,Ductile,Heat Stabilized,Hot Water Moldability,Impact Modified,Low Warpag

Product information

Amodel? ET-1000 HS

Polyphthalamide

Solvay Specialty Polymers

Product Description:

Amodel? ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel? PPA resins, ET-1000 HS offers high fatigue strength, good chemical resistance and high mechanical property retention over a broad temperature and humidity range.

Natural: ET-1000 HS NT

Additive	Heat Stabilizer,Impact Modifier
Features	Chemical Resistant,Ductile,Heat Stabilized,Hot Water Moldability,Impact Modified,Low Warpage
Uses	Automotive Applications,,Automotive Electronics,Automotive Under the Hood,Connectors,General Purpose,Housings,Industrial Applications,Industrial Parts,Lawn and Garden Equipment,Machine/Mechanical Parts,Metal Replacement
RoHS Compliance	RoHS Compliant
Appearance	Natural Color
Forms	Pellets
Processing Method	Water-Heated Mold Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.13	--	g/cm3	ISO 1183/A
Molding Shrinkage				ASTM D955
Flow	0.015	--	in/in
Across Flow	0.015	--	in/in
Water Absorption (24 hr)	0.70	--	%	ASTM D570
Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness (R-Scale)	120	--		ASTM D785

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus
--	350000	350000	psi	ASTM D638
73°F	350000	--	psi	ISO 527-2
212°F	290000	--	psi	ISO 527-2
Tensile Stress
Yield, 73°F	10200	--	psi	ISO 527-2
Yield, 212°F	4900	--	psi	ISO 527-2
Break, 73°F	8700	--	psi	ISO 527-2
-40°F	16000	14000	psi	ASTM D638
73°F	10000	9100	psi	ASTM D638
Tensile Elongation
Yield, -40°F	9.0	9.0	%	ASTM D638
Yield, 73°F	6.0	6.0	%	ASTM D638
Yield, 73°F	5.0	--	%	ISO 527-2
Yield, 212°F	4.3	--	%	ISO 527-2
Break, -40°F	12	11	%	ASTM D638
Break, 73°F	20	18	%	ASTM D638
Break, 73°F	7.0	--	%	ISO 527-2
Break, 212°F	95	--	%	ISO 527-2
Flexural Modulus
--	330000	310000	psi	ASTM D790
73°F	260000	--	psi	ISO 178
212°F	190000	--	psi	ISO 178
Flexural Strength
--	15800	12400	psi	ASTM D790
73°F	10200	--	psi	ISO 178
212°F	6400	--	psi	ISO 178
Shear Strength	8500	--	psi	ASTM D732
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)	6.00	--	mg	ASTM D1044
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength(73°F)	37	--	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength(73°F)	No Break	--		ISO 179/1eU
Notched Izod Impact
-40°F	2.0	--	ft·lb/in	ASTM D256
73°F	17	20	ft·lb/in	ASTM D256
73°F	35	--	ft·lb/in2	ISO 180/1A
Unnotched Izod Impact Strength(73°F)	No Break	--		ISO 180/1U
Instrumented Dart Impact				ASTM D3763
Energy to Maximum Load 3	336	--	in·lb
Total Energy	480	--	in·lb

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
264 psi, Unannealed	228	--	°F	ISO 75-2/A
264 psi, Annealed	248	--	°F	ASTM D648
Melting Temperature	590	--	°F	ISO 11357-3, ASTM D3418
CLTE				ASTM E831
Flow : 32 to 212°F	4.3E-5	--	in/in/°F
Flow : 212 to 392°F	7.8E-5	--	in/in/°F
Transverse : 32 to 212°F	4.5E-5	--	in/in/°F
Transverse : 212 to 392°F	6.1E-5	--	in/in/°F

Injection	Dry	Unit
Drying Temperature	230	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.030 to 0.060	%
Rear Temperature	580 to 605	°F
Front Temperature	600 to 625	°F
Processing (Melt) Temp	610 to 650	°F
Mold Temperature	> 275	°F
Injection Notes
MOLD TEMPERATURE If the wall is thick, lower temperatures may be used to prevent ejector pin problems. STORAGE: Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? processing guide.

Products

Products

Amodel? ET-1000 HS

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service