殴美一区二区,韩国女主播av,国产一区二区免费视频

Delrin? 127UV NC010

Manufacturer: Delrin
Produced At: Import/ China
Product Category: POM
Product No: Delrin? 127UV NC010
Product Quantity: 25KG / BAG
Product Features: High Viscosity，Homopolymer，UV Stabilized

Product information

Delrin? 127UV NC010

ACETAL RESIN

Product Description:

UV Stabilized High Viscosity Acetal Homopolymer

Additive	Lubricant，Mold Release，UV Stabilizer
Features	High Viscosity，Homopolymer，UV Stabilized
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion，Injection Molding，Profile Extrusion，Sheet Extrusion
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Tensile Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	POM
Resin ID (ISO 1043)	POM

Physical	Nominal Value	Unit	Test Method
Density	1.42	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)	2.4	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.116	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.9	%
Flow	2.1	%
Water Absorption			ISO 62
73°F, 24 hr	0.50	%
Saturation, 73°F, 0.0787 in	1.2	%
Equilibrium, 73°F, 0.0787 in, 50% RH	0.30	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	92
R-Scale	120

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	435000	psi	ISO 527-2
Tensile Stress (Yield)	10200	psi	ISO 527-2
Tensile Strain (Yield)	23	%	ISO 527-2
Nominal Tensile Strain at Break	45	%	ISO 527-2
Flexural Modulus	377000	psi	ISO 178
Flexural Stress			ISO 178
--	10400	psi
3.5% Strain	11700	psi
Poisson's Ratio	0.37		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	5.2	ft·lb/in2
73°F	7.1	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	170	ft·lb/in2
73°F	190	ft·lb/in2
Notched Izod Impact Strength			ISO 180/1A
-40°F	5.2	ft·lb/in2
73°F	6.2	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	320	°F	ISO 75-2/B
264 psi, Unannealed	199	°F	ISO 75-2/A
Vicat Softening Temperature	320	°F	ISO 306/B50
Melting Temperature 3	352	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.7E-5	in/in/°F
Transverse	6.1E-5	in/in/°F
Annealing Temperature	320	°F
Annealing Time - Optional	30.0	min/mm

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+13	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	3.50
1 MHz	3.40
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Burning Rate 4 (0.0394 in)	1.1	in/min	ISO 3795
Flame Rating
0.031 in	HB		UL 94
0.03 in	HB		IEC 60695-11-10, -20
FMVSS Flammability	B		FMVSS 302

Additional Information	Nominal Value	Unit	Test Method
Emission	< 8.00	mg/kg	VDA 275

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	410 to 428	°F
Melt Temperature, Optimum	419	°F
Mold Temperature	176 to 212	°F
Mold Temperature, Optimum	194	°F
Holding Pressure	13100 to 16000	psi
Drying Recommended	yes
Hold Pressure Time	8.00	s/mm
Extrusion	Nominal Value	Unit
Drying Temperature	167 to 185	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Melt Temperature	383 to 401	°F
Extrusion Melt Temperature, Optimum	392	°F

Products

Products

Delrin? 127UV NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service