久久免费在线,www黄色片,黄污在线观看

Manufacturer: Celanese
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel? 73G15L NC010
Product Quantity: 25KG / BAG

Zytel? 73G15L NC010

NYLON RESIN

Product Description:

15% Glass Reinforced Polyamide 6

Filler / Reinforcement	Glass Fiber, 15% Filler by Weight
Additive	Lubricant，Mold Release
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Tensile Modulus vs. Temperature (ISO 11403-1)
Part Marking Code (ISO 11469)	PA6-GF15
Resin ID (ISO 1043)	PA6-GF15

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	870000	508000	psi	ISO 527-2
Tensile Stress (Break)	19600	10400	psi	ISO 527-2
Tensile Strain (Break)	4.0	10	%	ISO 527-2
Flexural Modulus	725000	--	psi	ISO 178
Poisson's Ratio	0.35	0.37		ISO 527
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-40°F	2.9	--	ft·lb/in2
-22°F	2.9	6.7	ft·lb/in2
73°F	3.3	7.1	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	21	26	ft·lb/in2
73°F	24	45	ft·lb/in2
Notched Izod Impact Strength				ISO 180/1A
-40°F	2.4	--	ft·lb/in2
-22°F	2.4	--	ft·lb/in2
73°F	2.9	5.7	ft·lb/in2
Unnotched Izod Impact Strength				ISO 180/1U
-40°F	19	--	ft·lb/in2
73°F	21	--	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	428	--	°F	ISO 75-2/B
264 psi, Unannealed	392	--	°F	ISO 75-2/A
Vicat Softening Temperature	419	--	°F	ISO 306/B50
Melting Temperature 3	430	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	2.1E-5	--	in/in/°F
Transverse	6.1E-5	--	in/in/°F

Fill Analysis	Dry	Conditioned	Unit	Test Method
Melt Density	1.07	--	g/cm3
Specific Heat Capacity of Melt	0.590	--	Btu/lb/°F
Thermal Conductivity of Melt	1.3	--	Btu·in/hr/ft2/°F
Additional Information	Dry	Conditioned	Unit	Test Method
Odor 5	4.00	--		VDA 270

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	500 to 536	°F
Melt Temperature, Optimum	518	°F
Mold Temperature	158 to 248	°F
Mold Temperature, Optimum	212	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm
Maximum Screw Tangential Speed	472	in/min

Products