国产欧美专区,日本h片在线观看,日批大全

^{<thead id="e6q8c"><acronym id="e6q8c"></acronym></thead>}<tr id="e6q8c"><address id="e6q8c"></address></tr>

Manufacturer: Celanese
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel? 73G30TGI BK267
Product Quantity: 25KG / BAG

Zytel? 73G30TGI BK267

NYLON RESIN

Product Description:

30% Glass Reinforced, Toughened, Polyamide 6

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2)
Part Marking Code (ISO 11469)	PA6-GF30
Resin ID (ISO 1043)	PA6-GF30

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus 2	1.38E+6	870000	psi	ISO 527-2
Tensile Stress 3 (Break)	23200	13100	psi	ISO 527-2
Tensile Strain 2 (Break)	3.3	5.0	%	ISO 527-2
Poisson's Ratio	0.34	0.35		ISO 527
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength 4				ISO 179/1eA
-22°F	4.8	11	ft·lb/in2
73°F	6.7	8.6	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	410	--	°F	ISO 75-2/B
264 psi, Unannealed	403	--	°F	ISO 75-2/A
Vicat Softening Temperature	410	--	°F	ISO 306/B50
Melting Temperature 5	428	--	°F	ISO 11357-3
CLTE 2				ISO 11359-2
Flow	1.7E-5	--	in/in/°F
Transverse	6.7E-5	--	in/in/°F

Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate 6 (0.0394 in)	< 3.9	--	in/min	ISO 3795
Flammability Classification 2(0.06 in)	HB	--		IEC 60695-11-10, -20
FMVSS Flammability	B	--		FMVSS 302

Fill Analysis	Dry	Conditioned	Unit
Melt Density 2	1.31	--	g/cm3
Ejection Temperature	410	--	°F
Specific Heat Capacity of Melt 2	0.526	--	Btu/lb/°F
Thermal Conductivity of Melt 2	1.6	--	Btu·in/hr/ft2/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	500 to 536	°F
Melt Temperature, Optimum	518	°F
Mold Temperature	158 to 248	°F
Mold Temperature, Optimum	212	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm
Maximum Screw Tangential Speed	472	in/min

<var id="qxkvw"><strong id="qxkvw"></strong></var>

Products